|
1525-1565nm C波段拉曼放大器 机架式
RA series Raman Amplifiers are optical fiber amplifier that designed to recover optical loss incurred in optical fiber and thus extending the transmission distance. RA series is designed to amplify optical signals in ultra long-haul DWDM networks. RA can also be incorporated into HFC/CATV networks to increase the transmission range of analog and digital channels.
Unlike EDFAs, Raman amplifiers are based on Scattering Raman Amplification which uses the single mode optical fiber in the link itself as the amplification medium. RA series Raman Amplifiers are typically installed in the mid-stream of signal or placed before receivers to increase the optical power level signals. Utilizing an high-power, multiple pump lasers design, RA series provide very broad operating wavelength range, constant optical gain, and effectively reduce noise figures in the link.
It is an ideal solution for extending the transmission range of 10G/40G DWDM networks without the installation of costly repeater. By using a combination of EDFA and RA, HFC/CATV networks operator can extend the transmission distance of analog channels and QAM digitals signal up to 250km.
RA series Raman Amplifiers are constructed with Telcordia-qualified components to ensure 15+ years of continuous operating life. They are backed by our standard 3 year limited product warranty. Our technical team provide in-house technical support for networks installation.
Features:
- Support up to 80 DWDM channels at 10G/40G transmission link
- Extend QAM digital and analog channels in HFC/CATV transport
- Gain up to 13dB
- Effective Noise Figure of -1.3 dB
|
Technical Specifications
|
|
Model Number
|
RA-C
|
|
|
|
|
Operating Wavelength Range
|
1525 to 1565nm
|
|
|
|
|
Signal Gain Average
|
11-13dB
|
|
|
|
|
Gain Flatness
|
± 0.75dB
|
|
|
|
|
Pumper Laser
|
4
|
|
|
|
|
Pump Power Total
|
700mW
|
|
|
|
|
Signal Insertion Loss
|
1.0dB Typical (with input fiber spliced)
|
|
|
|
|
Input Signal Level
|
-40 to +5dB per channel
|
|
|
|
|
Effective Noise Figure
|
-1.3dB Typical
|
|
|
|
|
Polarization Mode Dispersion (PMD)
|
0.2ps Max.
|
|
|
|
|
Polarization Dependent Gain (PDG)
|
0.2dB Max.
|
|
|
|
|
Power Stability
|
± 1.0dB over 8 hours
|
|
|
|
|
Input/Output Isolation
|
30dB Min.
|
|
|
|
|
Mechanical Specifications
|
|
|
|
|
|
Operation Temperature
|
0°C to 50°C
|
|
|
|
|
Storage Temperature
|
-10°C to 70°C
|
|
|
|
|
Power Supply
|
80-240V, 43-63Hz AC
|
|
|
|
|
Power Consumption
|
80W Max.
|
|
|
|
|
Housing Dimensions
|
2RU: 19″x14″x3.5″
|
|
|
|
|
Control/Monitoring
|
Pump Laser Temperature & Current
|
|
|
|
|
Display
|
Output Power Level, TEC Temperature
|
|
|
|
|
Alarm
|
Over Temperature, Over Current
|
|
|
|
|
Protection
|
Loss of input signal automatically disable pump lasers
|
|
|
|
|
Computer Interface
|
Ethernet for SNMP interface Optional
|
|
|
|
|
Optical Input Port
|
Bare fiber, SMF-28 with 3mm Standard
|
|
|
|
|
Optical Output Port
|
SC/APC Standard, FC/APC, LC/APC Optional
|
|
|
|
|
|
|
